|
Loudspeaker Amplifier V2, Wireless, Singlewire-enabledThe CyberData SIP-enabled VoIP V2 Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast CK. This PoE-powered device hooks up easily to new and existing Singlewire installations.
With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.
This new version of our popular Loudspeaker Amplifier, which includes the NEMA enclosure (NEMA Type 3R / IP42), can be used in some outdoor environments, and is perfect for noisy and industrial environments such as warehouses and machine shops.
| 
Click to Enlarge Image
|
Product Features| | - InformaCast compliant
- InformaCast CK compliant
- Dual speed 10/100 Mbps
- Weather-resistant NEMA enclosure
- Web-base firmware upgradeable
- Power-over-ethernet enabled
- IGMP
- Autoprovisioning
- Line-out connector
|
|
Product Specification| |
Protocol
~ InformaCast v4.0 and later
Ethernet I/F
~ 10/100 Mbps
Power Input
~ PoE 802.3at or 802.3af
Operating Temperature
~ -30 to 55C
Payload Types
~ G711
Output Level:
~ 802.3af: Up to 8 watts
~ 802.3at: Up to 25 watts
Line Out:
~ Output Signal Amplitudes: 2.0 VPP maximum
~ Output Level: +2dBm nominal
~ Total Harmonic Distortion: 0.5% maximum
~ Output Impedance: 10k ohm
Dimension
~ 14" x 10" x 4" (H x W x D)
|
|
Ordering Information
|